Version 3.1.3
- Uploaded on
- Aug 25, 2026
- File
- 32.5 MB · XAPK
- Android
- Android 5.0+
- Status
- Archived build
- Size
- 32.5 MB
- File type
- XAPK
- Requirement
- Android 5.0+
- Uploaded on
- Aug 25, 2026
This is an older build. Compare package identity, checksum, and scan notes before installing. Review file checks
Old vs latest
Compare this archived build with the current latest
Recommended current release
- Uploaded on
- Aug 25, 2026
- File
- 32.5 MB · XAPK
- Android
- Android 5.0+
- Status
- Recommended
Current latest: Mixing Station 3.1.3
Archived editorial snapshot
Mixing Station 3.1.3 archive notes
Mixing Station 3.1.3 is a remote mixer-control release for Android users who need one interface across a range of digital consoles. It starts with manufacturer and model selection, then provides connection profiles for direct or searched access, Full, Personal Monitoring, or Custom modes, and an offline route for preparing layouts away from hardware. The Android package targets Android 5.0 or newer and carries the XAPK's exact package and signing identity. Version 3.1.3 adds dLive VS1 vocal-shift and dMix send-tap options while addressing several Qu, SQ, layout-editor, slider, and XAIR issues listed in the release notes. Console access still depends on compatible network setup when operating online.
One control surface for many console families
One Android surface keeps model selection consistent while you move between Behringer, Allen & Heath, Yamaha, and other supported console families. That reduces the need to relearn a separate remote layout for each desk and gives engineers a predictable starting point for rehearsals, shows, or a broadcast position.
Profiles for direct, searched, and monitor-focused work
A mixer profile can use a direct connection or local search and can separate Full, Personal Monitoring, and Custom access. This gives a front-of-house operator, vocalist, or fixed installation a practical starting point for the same console.
Offline preparation plus version-specific mixer fixes
Offline setup exposes the channel surface and layout choices before hardware is connected. In this release, dLive VS1 vocal shift and dMix send-tap configuration were added, while several Qu, SQ, layout-editor, slider, and XAIR issues were fixed.
Version evidence
File checks for this archived build
Review package identity, VirusTotal signals, install notes, and SHA-256 for version 3.1.3.
Package
org.devcore.mixingstation
VirusTotal
0 / 75 flagged
Install test
Installed & launched
SHA-256
2d403b5561e476c557eabc066d298901bae287bc10ed4b2a314f9a806d3680ce
Recorded device
Android device · Installed and launched successfully
Evidence reflects the checks recorded for this version. Re-verify the file you download before installing.
Other Mixing Station versions
Browse every published Mixing Station build and choose the version you need.
